The Deblois Street Dory model is coming together! The approach is to model it at 1/4-scale and line off the planking on the model. These points will be transferred back to a 1/4-scale lofting of the boat and the lines plan will be redrawn to show the chines. A new table of offsets will be made and a couple in Portland will be building the Dory this Fall. Feel free to see a drawing of the Deblois Street Dory by clicking HERE.
In Goat Island Skiff land, preparations are under way to produce Birdsmouth masts as kits or final products, depending on the customers needs. Well make a Birdsmouth mast for our own Goat, first, and ours may be the first Birdsmouth Mast to be used in a Goat Island Skiff! The plan is to market these to other Goat builders who might not have the time or interest in taking on this project. The picture shows the key to doing this on a semi-production basis, a stave taper jig. A long plane will be used to do the work; the plane sole will follow the hardwood guides and the staves will lie in the "bed" between the guides. The staves will eventually match the guides width and carry the right taper along their length.
0 komentar:
Posting Komentar