For those of you who may have subscribed to the new website, I have an uncomfortable feeling that you may have been deluged with "New Posts" as I have been progressing with the process of learning the new software characteristics. If so, please accept my sincere apologies.The good news is that Im reading and experimenting diligently, and progress is starting to take place. I hope to get the Designs section and the embryo Shop looking more professional in a few days.
Concurrently, Im working on the construction of a new mast for a customer, and it promises to be a major step forward in home-workshop-buildable masts and other spars, without the need to cut Birds Mouth profiles. Many people dont understand that very small errors in the setting-up of the saw or router for Birds Mouth staves can have a huge effect on the diameter of the finished spar. Also, unless you have a very well arranged table-saw or router table, the potential for disaster is substantial...
They say that, ..pride comes before you end up with mud on your face..., but Im quietly confident that the prototype mast Im making will be faster, safer, and easier to build, and will have one REALLY substantial advantage over a Birds Mouth spar in that the wall thickness as a percentage of spar diameter will remain constant over the length of the mast. In the case of a Birds Mouth mast, the wall thickness (in percentage terms) increases as the mast tapers towards the tip - so much so that many masts become effectively solid towards the tip - not what is wanted at all! We need to keep masts light - especially as we go higher.
More to come when I get through this website business.
Ive got a number of boats under construction or repair, but design will dominate before too long.
0 komentar:
Posting Komentar